Veridian Fire Armor® 3D Structural FireFighting Gloves, Gauntlet Cuff

A TRUE THREE-DIMENSIONAL FORM FITTING GLOVE WITH A CURVED FINGER DESIGN, INSET THUMB WITH ENHANCED FINGER DEXTERITY.

The one-piece back shell is made from FR and water repellent 100% Kevlar knit fleece 7.5 oz. fabric with exceptional flexibility across the back of the hand.

A non-restricting Eversoft® leather knuckle band is sewn across the back for added knuckle protection. Elastic is sewn into the wrist crease for a close-fitting cuff. The back is lined with a layer of 6 oz. modacrylic non-melting and non-dripping liner.

• 60+ TPP and class-leading conductive heat transfer protection
• FR water repellent 100% Kevlar® knit fleece with a 1-piece back shell
• A layered non-restrictive knuckle patch
• Extra layer of 6 oz. modacrylic liner sewn to the back shell
• A double-backed 3 mil breathable Pyrotect Barricade moisture barrier
• 100% waterproof, viral/chemical penetration resistance, and bloodborne pathogen protection
• A layered 6 oz. 65% Kevlar®/35% Nomex® stitch bonded FR liner
• Five separate curved form-fitting forchettes made from 3.5 oz. to 4.0 oz. grain cow leather for maximum finger dexterity with a 60+ TPP rating
• Exclusive breathable adhesive for ensuring full liner/barrier glove bonding
• 1-piece palm 3.5 to 4.0 oz. Eversoft® cow leather tanned with additives to stay soft when wet and low water absorbance with repeated soakings for a 60+ TPP rating
• 4” Black Nomex cuff with leather pull patch and hang-up loop
• A double-backed 3 mil Pryotect Barricade moisture barrier is breathable, 100% waterproof, viral/chemical penetration resistant, and provides bloodborne pathogen protection. Barrier extends the full length of the glove for complete protection.
• The 6 oz. 65% Kevlar® and 35% Nomex® stitch bonded FR liner insulates the inside back of the hand.
• Five separate finger forchettes have curved and form-fitted cut from 3.5 oz. to 4 oz. black Flexor cowhide tanned to meet NFPA flame test for the highest finger dexterity.
• Special breathable adhesive is coated over the entire finger, thumb, and palm area, ensuring full liner/barrier/glove adhesion meets NFPA requirements for liner retention.
• Palm is 1 piece 3.5 to 4.0 oz. Eversoft cow leather tanned to meet NFPA flame resistance test and treated with additives to stay soft when wet with low water absorbance during repeated soakings. Thumb is 2-piece inset into palm to provide unrestricted movements of the thumb right to left.
• Glove liner has a 2" grain leather cuff sewn inside the glove wrist over top of the liner for the gauntlet model and bonded with a 1.5" black FR binding to finish the cuff.
• Wristlet model has a 4” Black Nomex® cuff with leather pull patch and hang-up loop.
• This glove is sewn completely with 30/3 Kevlar® thread.